Keyword 1 introduces the product classification of Keyword 1 in detail, including the use, model, range, picture, 威尼斯人官网 and price of all products under Keyword 1 . At the same time, we have also selected the industry information, price quotes, exhibition information, picture materials, etc. of the keyword 1 category for you, and have been well received by users in the country. For more details, please click to visit!
In the processing of stainless steel, sometimes it is difficult to cut the location, and deep processing will be performed using cutting technology. During the cutting process, stainless steel will show some characteristic phenomena. First, stainless steel is strong and easily deformed. During the machining and cutting process of stainless steel, due to its constant elongation, especially austenitic stainless steel, a large plastic deformation will occur. Release time: 2016-07-27 Clicks: 28
The main difficulties in processing stainless steel materials are as follows: 1. Large cutting force and high cutting temperature This type of material has high strength, large tangential stress and large plastic deformation during cutting, and therefore large cutting force. In addition, the thermal conductivity of the material is extremely poor, which causes the cutting temperature to rise, and the high temperature is often concentrated in a narrow area near the cutting edge of the tool, which accelerates the wear of the tool. 2. Processing hard Release time: 2016-07-27 Clicks: 23
With the 威尼斯人官网 of Dainan's shutdown of the intermediate frequency furnace continued to ferment yesterday, today Dainan's affairs are making waves again, and Dainan will fully implement the blackout of the intermediate frequency furnace enterprise before tomorrow (24th) at 00:00! May Release time: 2016-07-27 Clicks: 29
1. The main motor cannot start. Reason: 1. The main motor start circuit is faulty, such as: the emergency stop button is not released, the cable wiring is loose, the 24V control power, etc .; Circuit breakers, AC contactors and other overload protection or damage; 3, power problems; measures: 1, inspection
Release time: 2016-07-27 Clicks: 31